产品详情 //

产品性能测试：

Product performance test:

产品特性：Characteristics

1、 标准产品，施工性好、柔韧性好

1. Standard coatings: good construction and flexibility

2、 高性能产品，优异的耐醇性、耐磨耗性、耐化学品性

2. High-performance coatings: excellent alcohol resistance, abrasion resistance and chemical resistance.

3、 高粘度产品，高粘度、综合性能好

3. High viscosity coatings: good comprehensive performance

4、 高光产品，高光、丰满、施工性好、综合性能优

4. High gloss coatings: high gloss fullness, excellent construction and comprehensive performance

5、 仿电镀产品，仿电镀，达到逼真效果

5. Imitation plating coatings: imitation plating can achieve realistic effects

测试条件：

Preparation of test panels:

1、喷涂底材：ABS底材

1. Substrate: ABS

2、漆膜厚度：10～15ｕｍ

2. Film thickness: 10~1μm

3、烘烤：60℃ X 20min干燥，放置72小时后测试

3. Baking condition: 60℃ X 20min drying, stay for 72 hours before test.

注意事项：

Notes

1、 涂料开罐后，应搅拌至均匀，方可使用。

1. Thoroughly mixed before use.

2、 涂料在室温下不开罐的贮存期为六个月。

2. Storage period of coating is six months in room temperature under tank sealing condition.

3、 请使用指定配套稀释剂。

3. Please use recommended thinner.

4、 成型时的脱膜剂及其它灰尘等附著物，请在涂装前擦拭干净。

4. The Substrate must be free from lubricant , smut and other dirt prior to application.

5、 视底材不同附著力也有不同，涂装前充分确认漆膜性能。

5. Please confirm the ability of the paint film before application due to its different adhesion on varieties of substrantes.

6、 与其它涂料重复涂装时，可能发生龟裂，请先进行充分确认。

6. Please notices that crackling may occur when it coats with other paints.